FL060031 FL6/31
FL060032 FL6/32
FL060033 FL6/33
FL060034 FL6/34
FL060036 FL6/36
FL060038 FL6/38
FL060S04 FL6/S04
FL070001 FL7/1
FL070S01 FL7/S01
FL070S02 FL7P/S02
FL070S03 FL7/S03
Band 11 Multiple 2-Way Splitting Filter. FL6/31 is a 19-
panel housing for identical splitting filters for use in
Band
11
(88-108MHz).
Each unit
is
based
on a
2-way
Wilkinson hybrid; maximum input power 20W. 19" panel.
Supersedes 4 x FLS/9. For use with AM14/48 amplifiers. DD
1980.
Loudspeaker Splitting Filter. All filter componentsare
contained on a single printed board which is to be mounted
on the rear of the CT4/10A baffle and is designed to drive
a 34mm tweeter LS2/12 and a 200mm Bass/Mid range
loudspeaker LS2/13,
both 8 ohms impedance.
Supersedes
FL6/2S.
Parent
equipment
LS3/4C.
DD
1981.
DDMI
3.712(82).
4-Way Band 11 Splitting Filter. This unit splits a single
carrier input into 4 co-phase outputs. The maximum input
power is 20 watts in the range 88 - 108MHz. 19" Rack
Mounting Panel. Parent equipment AM14/S1. DD 1981. DDMI
5.419(82).
Dual 2-Way Band 11 Splitting Filter. The FL6/34 is a dual,
two-way Wilkinson splitter, producing equal amplitude/phase
outputs from a pair of inputs (88-108MHz). Also included
on the Mon. input power 2 x 18W. 4U 19" Panel Hinging.
Parent equipment AM14/S1B. DD 1982. DDMI 5.421(82).
Loudspeaker Crossover Filter. Low output impedance high
level cross over unit for LSS/9 loudspeaker. Supersedes
FL6/3S. Parent equipment LSS/9. DD(3) 1985.
Kef SP2128 Loudspeaker Splitting Filter. This
PCB assembly is used in the LS3/SA, when the
SP1228
is
used.
12Sx120mm
approx.
Parent
LS3/SA. Supersedes FL6/23. D&ED (S. Lab) 1987.
crossover
Kef B110
equipment
Dual lldB Directional Coupler. Replaces the UN24/S0S on
the EP16M/S02 transposer equipment when the latter is
driving a higher power output amplifier. DD 1978. DDMI
5.354(78).
Car Radio Filter. Car Radio Filter to pass MF and VHF, to
stop 78 MHz and 141 MHz. BNC connectors. Die cast box
110 x 60 x 30 mm. TCPD 1984.
Co-Channel Interference (CCI) Filter. This unit provides
automatic filtering when CCI (5 thirds or 10 thirds) is
detected. Power requirements PS2/184. CH1/64A. DD 1978.
Co-Channel Interference (CCI) Filter. This case comprises
2 x FL7/S01 and 1 x PS2/184. Power requirements 240V a.c.
mains. DD 1978.
Subcarrier Bandstop Filter. This unit removes all
chrominance information from a 625 line television signal
prior to sync detection. It replaces the "Sync Pulse
Sensor Filter" printed circuit board fitted as standard.
64mm x 24mm printed circuit board. Parent equipment Pye
UHF Driver Type 846418/00. DD 1979.
123

23