ME080S01 ME8/S01
ME080S02 ME8/S02
ME8/S02A
ME120009 ME12/9 A-G
ME120011 ME12/11
ME120012 ME12/12A&B
ME1S0007 ME1SP/7
ME1S0008 ME1S/8
ME15M/8
noise ratio, the Analogue Meter Unit displays this ratio on
its front-panel analogue meter. CH1/64A. Parent equipment
ME3SM/S02 modified and equipped with ME8/S02A. Chassis
extender CH1A/43. D & ED 1987. MI V.1033(87).
Noise Measuring Equipment. This unit forms part of the
'ME3M/S02 TV WAVEFORM ANALYSER'. Its purpose is to
produce a measurement of random noise both weighted and
unweighted, with or without the presence of a video signal.
Power requirements +12V, -12V, +SV. 4U Unsupported Card
with S7-way edge connector. Parent equipment ME3M/S02.
Sub-units FL1/S34, FL1/S3S, FL4/S91. DD 1981.
Noise Control Unit. This unit forms part of the ME3M/S02
TV Waveform Analyser. Its purpose is to control the
ME8/S01 unit for the measurement of random noise. Power
requirements +SV, -12V, 4U unsupported card with S7-way
edge connector. Parent equipment ME3M/S02. DD 1981. MI
V.10S8(87).
Noise Control Unit. This unit forms part of the ME3SM/S02,
TV Waveform Analyser. Its purpose is to control the
ME8/S01 unit for the measurement of random noise. It is
identical to the ME8/S02, except that it has the added
facility of an analogue output; it fits in the ME8/S02
slot.
When
a
modified
ME3SM/S02
is
set
to
measure
unweighted signal to noise ratio, this unit feeds an
analogue signal to drive an external ME8/2 Analogue Meter
Unit. Power requirements +SV, -12V. 4U unsupported pcb.
Chassis extender CH4/S. Parent equipment ME3SM/S02
(modified). D & ED (V) 1987.
Peak Programme Level Meter. Comprises AM20/3 Drive
Amplifier and meter to a range of Eq. Dept. Specifications,
most of which have the amplifier mounted on their
terminals. DD 1973. DDMI 3.S72. DDHB 3.137. EDI 10199.
Peak Programme Meter comprising ISEP panel mounted ME12/9D
meter, with AM20/3 Amplifier and monitoring amplifier for
headphones. SCPD 1977.
Stereo Peak Programme Meter. Stereo peak programme meters,
comprising AM20/S and meters to ED specs. lS02 and lS03
respectively. The amplifier circuit board mounts directly
onto the meter terminals. Electronic balanced input with
optional transformers on add-on board. Power requirements
24 V at 70 rnA. 9S x 110 mm. Supersedes ME12/10A & B. DD
1985. DDMI 3.74S(8S). DDHB 3.31S(8S).
Test Meter. lOOrnA Ls.d. meter is diecast box. Test
meter for TM4L/1 transmitter. Diecast box approximately
l20mm x 60mm x 40mm. DD 1978. DDMI S.369(79).
AM Transmitter Intermodulation Measuring Equipment.
Measures total intermodulation products and harmonic
distortion on AM transmitters. Comprises a dual and single
tone generator on fixed frequencies between 80Hz and SkHz,
and measuring circuits with an analogue meter read-out.
Power requirements +lSV -lSV. CH1/6SH. DD 1980.
AM Transmitter lntermodulation Measuring Equipment.
167

67