MPOZ0003 MPZ/3
MPOZ0004 MPZ/4
MPOZ0005 MPZ/5
MPOZ0006 MPZ/6
MPOZ0007 MPZ/7
MPOZ0008 MPZ/8
MPOZ0009 MPZ/9
MPOZOOI0 MPZ/10
MPOZOOll MPZ/ll
Cemast No.03833lZ) in a CH1/64A series chassis and bring
plug connections to tags convenient for wiring. Printed
circuit board l44mm x 35mm. DD 1977.
Delay Line Mounting for two pulse delay lines and resistors
forming aT-type attenuator. Unequipped PCB 9 4mm x 55mm.
Parent equipment MPl/5. DD 1977. DDMI 8.589(77).
Bypass Card. Fits into crate AM16M/16 (part of RPZ/10) to
connect inputs to outputs of any optional audio processing
facility not specified at time of manufacture. Can also be
used
to
overplug
faulty processing unit.
This unit
is
simply a printed circuit board without any active passive
components. ZU unsupported card. DD 1978.
Transformer Termination. To provide a standard termination
for up to 6 'A' size assembly S.C. transformers mounted in
line in Radio Continuity chassis type CH1/76 and CH1/77.
3lmm x ZZZmm. Parent equipment DKZ/Z4. DD 1979.
Buzzer Card. Variable frequency and amplitude buzzer used
in CMCR's.
Small printed circuit board with transducer
attached. Power requirements lZ-Z4v d.c. Printed circuit
board 50mm x 50mm. SCPD 1979.
Transformer Termination. To provide a standard termination
for up to 6 'A' size assembly S.C. transformers mounted in
line in Radio Continuity chassis, type CHl/76 and CH1/77.
This unit is similar to the MPZ/5 but has provision for
resistive attenuators if required. 31 mm x Z2Z mm printed
circuit board. Parent equipment DK2/24. DD 1979. DDMI
3.663(79).
Voltage Level Detector. Detects two voltage levels of a
d.c. fader control and supplies current to light either of
two remote lamps accordingly. Power requirements +12V at
SOmA, +12V at 10mA. 107mm x 37mm printed circuit board.
DD 1979. DDMI 3.661(79). DDHB 3.233(79)
Bypass Card. Used as a sample board to analyse gold
plating on edge connectors. Identical in all respects to
MP2/4. ED 1979. DDMI 3.661(79).
Delay Line Mounting. Accommodates one or two 1 microsecond
delay lines (21921-006) on printed circuit board for
fitting in CH1/80. Occupies two positions in CHl/80, one
above the other. If mounted in front positions the two
sections can be U-linked together or used as separate
sections. Power requirements passive. Printed circuit
board 290mm x 190mm approximately. DD 1979.
Delay Line Mounting. Printed circuit board to mount
programmable video delay line (0-Z35ns or 0-155ns) and/or
fixed video delay line (50-250ns). Includes fine delay
trimming network to give t4 adjustment. Printed circuit
board mounts in MP1/5, CH2/6, CH1/80, CH1/81 and MP1/12.
Delay lines not supplied. 95mm x 55mm approximately. DD
1980.
181

81