MP020041 MP2/41
MP020044 MP2/44
MP020045 MP2/45
MP020046 MP2/46
MP020047 MP2/47
MP020048 MP2/48
MP020049 MP2/49
MP020050 MP2/50
provide a low cost alternative to the TDC1007 (approx 300
versus 700 at March 85). One PCB, conforming to 64-pin
DIL outline. DD 1985.
Signal Path Interceptor. This cable assembly intercepts
the signal path in a Marconi B6034 transmitter to and from
the "Low Power A.F. Unit", to permit the installation of an
AM6/30. Parent equipment AM6/30. DD(3) 1985.
Test Jig Interface. This Test Jig, in conjunction with the
TE1/57 Test Adaptor, allows the testing and maintenance of
the Triple Video DACs C09/509&A and C09/510&A. D.C. power
for the test assembly has to be provided externally to a
connector panel integral with the MP2/44. Power
requirements +5.35 V, +12 V, -12 V, -5.2 V. PCB: 215mm x
127mm. DD(l) 1986. MI V.1061(87).
TV36 Cable Assembly. Cable assembly incorporating 39-pole
camera connectors and P1F36/1MD camera cable which carries
video RGB, audio and control signals. Options available
include plug to plug, socket to socket and plug to socket,
all with either straight and/or angled cable entries.
Further options cater for adapter plates and gaiters. All
lengths and options are to be specified when ordering
the assembly. D & ED 1986.
Triax Cable Assembly. Cable assembly incorporating
triaxial camera connectors and PSF1/9MA camera cable.
Options available include plug to plug, socket to socket
and plug to socket, with corresponding gaiters available as
a further option. All lengths and options are to be
specified when ordering the assembly. D & ED 1986.
Augmented Triax Cable Assembly. Cable assembly
incorporating augmented triaxial camera connectors and
P1F20/1M camera cable. Options available include plug to
plug, socket to socket and plug to socket, with
corresponding gaiters available as a further option.
Intended primarily for studio use. All lengths and options
are to be specifed when ordering the assembly. D & ED
1986.
Multi-Core Microphone Cable Assembly. Cable assembly
incorporating 26-pole bayonet connectors and P1F28/1M
multicore microphone cable. Options available include,
plug to plug, socket to socket and plug to socket. Further
options cater for gaiters to suit plugs or sockets. All
lengths and options are to be specified when ordering the
assembly. D & ED 1986.
Bargraph Display Mounting. Connects an L.E.D. Bargraph
display to a 20-way ribbon cable. D & ED(V) 1986.
7-Segment Display Bus Connector. A PCB to interface
between a 20-way IDC bus and 9 seven-segment displays. It
also interfaces 3 rotary encoders to an additional 20-way
IDC bus. Power requirements +5 V. D & ED(V) 1986.
185

85