AM210507 AM21/507
AM220013 AM22/13
AM220014 AM22/14
AM220015 AM22/15
AM230001 AM23/1
AM230002 AM23/2
AM230508 AM23/508A
AM230509 AM23/509
AM230512 AM23/512
AM230514 AM23/513
Receiver. Power requirements +18V and -5.2V d.c. CHl/64
printed board with G06 connector. DD 1978.
1. F. Amplifier. Used
40.75 MHz IF amplifier
requirements !12V dc.
DD (5) 1984.
in the DMIM/506 and RC5M/503 as a
for vision and sound signals. Power
CHl/86. Parent equipment RC5M/503.
6-Way OB Response Selection Amplifier. This unit contains
six R. S .A. modules of the type used in the MX6/3 and a
power supply module of the type used in the DK2/20. This
unit is for use with the MX6/2 OB Mixer. Specially built
and designed by Glen Sound Services to BBC specifications.
Similar to UNl/179 but approximately 280mm long x l82mm
high x l85mm deep. SCPD 1977.
Response Selection Amplifier.
one channel of audio Power
40mA. 2U unsupported card.
1977 .
Provides RSA facilities for
requirements !15V 40mA, +5V
Parent equipment RP2/10. DD
Response Selection Amplifier. Updated version of AM22/9
using Silicon Transistors, and operating on !12V supplies.
Passive components are replaced by modern types, and front
panel modified. Power requirements !12V, 47mA. CHl/72A.
DD 1981. DDMI 3.715(82).
Matrix Input Amplifier. Unit provides 10 independent
unbalanced outputs (for matrix inputs) from 10 balanced
transformerless inputs. Constructed on 3U ISEP PCB with
UECL connector. SCPD 1977.
Matrix Output Amplifier. Unit provides 20 unbalanced and
isolated outputs from 20 zero impedance inputs (from matrix
summing points). Constructed on 3U high ISEP PCB with 80
way UECL connector. SCPD 1977.
Destination Matrix Amplifier similar to AM23/502A but
allows control from 5V logic circuitry, either timed or
untimed. Used in MA2M/505. DD 1970. DD Spec 8.423. EDI.
Matrix Source Amplifier, as AM23/504A-D but having 8 shunt
elements. Printed circuit board. DD 1973. DDMI 8.507.
RGB to YIQ Matrix Amplifier. Matrixes RGB signals to YIQ.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance.
Power
requirements
+l2V
-12V
300mA.
4U
unsupported card with screen. DD 1978.
RGB to YUV Matrix Amplifier. Matrixes RGB signals to YUV.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance.
Power
requirements
+l2V
-12V
300mA.
4U
unuspported card with screen. Sub-unit C06/510. DD 1978.
2S

25