AM230514 AM23/514
AM230515 AM23/515
AM230516 AM23/516
AM230517 AM23/517
AM230518 AM23/518
AM230519 AM23/519A-C
AM230520 AM23/520
AM230521 AM23/521A
YUV to RGB Matrix Amplifier. Matrixes YUV signals to RGB.
High impedance inputs with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance.
Power
requirements
+12V,
-12V
300mA.
4U
unsupported card with screen. Sub-units UN14/538, GE4/567,
GL1/530, FL5/506, CD3/537 and FL4/584. DD 1978.
YUV to YIQ Matrix Amplifier. Matrixes YUV signals to YIQ.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance.
Power
requirements
+12V
-12V
300mA.
4U
unsupported card with screen. DD 1978.
YIQ to RGB Matrix Amplifier. Matrixes YIQ signals to RGB.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75 Q impedance; 'B' version 2
sets of outputs 75 Q impedance; 'c' version 3 sets of
outputs 75 Q impedance. Power requirements +12 V, -12 V
300 mA. 4U unsupported card with screen. DD 1978.
YIQ to YUV Matrix Amplifier. Matrixes YIQ signals to YUV.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance.
Power
requirements
+12V,
-12V
300mA.
4U
unuspported card with screen. DD 1978.
Matrix Amplifier IQ to UV. Matrixes IQ signals to UV.
High impedance input with facilities for terminating. 'A'
version 1 set of outputs 75Q impedance; 'B' version 2 sets
of outputs 75Q impedance; 'c' version 3 sets of outputs 75Q
impedance. Power requirements +12V, -12V 200mA. 4U card
with screen. Parent equipment C06/510. DD 1979.
NTSC Decoder Matrix Amplifier to convert from YIQ (NTSC) to
YUV (PAL Luminance and Colour difference signals).
A Version 1 set of outputs )
B Version 2 sets of outputs) output impedance 75Q
C Version 3 sets of outputs)
Power
requirements +12V,
-12V
at
300mA.
4U unsupported
card with screen. Coding positions 1, 23, 41. Parent
equipment C06/510 and PA6M/544. DD 1979.
RGB Matrix Amplifier. This unit receives a number of
binary and analogue video signals, each corresponding to a
different region of a picture which is required to have a
particular colour, and combines them with a resistive
matrix to produce resultant RED, GREEN and BLUE outputs.
The R, G and B components corresponding to each input
signal are set by means of potentiometers on the board.
The output stages are capable of driving 0.7V p-p into 75Q
loads. Power requirements +5V. 4U BMM unsupported card
with 57-way double-sided edge connector and PN1/29J panel.
DD 1980.
Matrix Amplifier. This
signals to analogue YUV.
amplifier converts analogue RGB
It is designed for a 700mV input
26

26