CHOl0076 CHl/76
CHl/76A-D
CHOl0077 CHl/77
CHl/77A-D
CHOl0078 CHl/78
CHOl0079 CHl/79
CHOl0080 CHl/80A
CHOl008l CHl/8lA
CD3/S4S, GE2/643 A-D, MN8/S0S, UN26/578, UN26/779 UN26/580t
UN26/S8lt UN26/S82t UN26/S83. RD 1982.
Sound Control Desk Chassis used on Radio Continuity suites.
260mm x
320mm x 300mm.
DD
1977.
DDHB
3.232
(79).
DDTM 3.209(78)t 3.227(79).
Sound Control Desk Chassis used on Radio Continuity suites.
CHl/76 basis chassis, CHl/76A basis chass is including
lacing bar subframes t CHl/76B basis chassis including 3U
card framet CHl/76C basis chassis including 4U card frame,
CHl/76D basic chassis including 2U card frame. 260mm x
320mm x 300mm. DD 1978. DDMI 3.667(79). DDHB 3.232(79).
DDTM 3.209(78).
Sound Control Desk Chassis used on Radio Continuity suites.
260mm wide x 22Smm high x 300mm deep.
DD 1977.
DDHB
3.232(79). DDTM 3.209(78), 3.227(79).
Sound Control Desk Chassis used on Radio Continuity
suites. CHl/76 basis chassis, CHl/76A basic chassis
including lacing bar subframes, CHl/76B basic chassis
including 3U card frame, CHl/76C basic chassis including 4U
card framet CHl/76D basic chasssis including 2U card
frame. 260mm wide x 22Smm high x 320mm x 300mm deep. DD
1978. DDMI 3.667(79). DDMI 3.667(79)DDHB 3.232(79). DDTM
3.209(78).
Band II Amplifier Chassis.
Splitter and Combiner Units.
a/ps; 'c' version has 2 lIps
l/P and 1 O/P. DD 1979.
To house Band 11 Amplifier,
'A' version has 3 lIps and 3
and 2 a/ps; 'D' version has 1
High Speed Wire-Wrap Chassis. This chassis is intended for
wire-wrapping circuits by hand or machine. It may be used
to produce either breadboards or the final production units
where circumstances permit. The printed board conforms to
the standard outline of a 4U BMM unsupported card and is
complete with handle and a one pie ce screen which may be
used for card coding 'like a coding comb'. The use of the
card is the same as the CHl/7S A but is more suited to fast
logic purposes and higher packing density. PNl/29J. DD
1979. DDMI 8.627(81). EDI 104ll(1)JUL87.
Replacement for CHl/80. Mounts 1-4 equalisers type EQS/S40
and EQS/SSO or delay line mountings MPl/3 and MP2/20 or
direct mounting of 2 490ns delay lines. 4U unsupported PCE
with J width panel. No termination panel as PCB is deeper
than normal BMM. MUSA connectors are mounted on PCB. 4u J
width, depth 3l2mm approx. Supersedes CHl/80. DD 1981.
DDMI 8.637(82). DDHB 8.376(82).
Equaliser Chassis. Replacement for CHl/8l. Mounts 1 or 2
equalisers type EQS/S40 and EQS/SSO or delay line mounting
MPl/3, MP2/20 and MP2/23 or direct mounting of a 490ns
delay line. 2U unsupported pcb with J width panel. No
termination panel as pcb is deeper than normal BMM. Musa
connectors are mounted on pcb. 2U J width, depth 3l2mm
approx. Supersedes CHl/8l. DD 1982. DDMI 8.643(82).
DDHB 8.383(82)
48

48