COOS0010 COS/10
COOSOOll COS/ll
COOS0012 COS/12
COOS0013 COS/"l3
COOS0014 COS/14
COOS001S COS/1S
COOS0016 COS/16
COOS0017 COS/17
COOS0018 COS/18
Studer B67 Interface Unit. Converts synchroniser control
voltages to those suitable for dirving a Studer B67 tape
machine.
Power requirements
:t12V.
4u BMM unsupported
card.
Parent
equipment RD4L/506
or RD4L/507.
DD
1978.
DDMI 7.494(82). DDHB 7.258(79). DDHB 7.296(82).
JVC CR8500 Interface Unit. This unit is sued in the
RD4L/S08 Timecode Tape Synchroniser and provides the
appropriate drive voltages to control a JVC CR8S00
Interface Unit. Coding bar slots to be 1, 13, 41. Power
re quirements +12V, -12V. Parent equipment RD4L/506. DD
1979. DDHB 7.2S9(79), 7.27S(80).
Transport Control Interface, Ampex VPR2. The unit is used
in the EP10M/SOl and EP10M/502, Edit Machine Control
Equipments. It contains logic circuitry and Interface
Circuits to drive the Transport functions of an Ampex VPR2.
Power
requirements
:t12V.
4U
BMM unsupported
card.
DD
1980.
Playback Preview Interface, Ampex VPR2. The unit is used
in the EP10M/502, Playback Machine Control Equipment.
Contains output interface circuitry to drive the preview
functions of the Ampex VPR2 machine. Power requirements
+12V. 4U BMM unsupportd card. DD 1980. DDMI 7.469(81).
Edit Control Interface, Ampex VPR2. The unit is used in
the EP10M/S01, Edit Machine Control Equipment. Contrins
output interface circuitry to drive the edit functions of
an Ampex VPR2 machine. Power requirements +1 2V. 4U BMM
unsupported card. DD 1980. DDMI 7.466(81).
Transport Control Interface, Ampex AVR2. The unit is used
in the Edit Control System RD4M/S09 when controlling Ampex
AVR2 machines. This card is fitted to the EP10M/502 (Edit
machine Control) and the EP10M/502 (Playback machine
Control).
Power
requirements
+12
volts.
4U
BMM
unsupported card. Parent equipment EP10M/502. DD 1981.
DDMI 7.493(82).
Preview Control Interface, Ampex AVR2. The unit is used in
the Edit Control System RD4M/S09 when controlling Ampex
AVR2 machines. This card is fitted to the EP10M/502
(Playback machine control). Power requirements +12 volts.
4U BMM unsupported card. Parent equipment EP10M/502. DD
1981. DDMI 7.492(82).
Edit Control Interface, Ampex AVR2. The unit is used in
the Edit Control System RD4M/509 when controlling an Ampex
AVR2 as an Edit machine. It is used in the EP10M/SOl (Edit
machine
control).
Power requirements +12 volts.
4U BMM
unsupported card. Parent equipment EP10M/S01. DD 1981.
Store Buffer Unit. For use in MIC's (Monitoring and
Information Centres) replacement for existing unit C05/6
when UN27/12 RAM cards are to be used. Power requirements
+5V at 200mA. 4U Card. Parent equipment PA1M/101. DD
1981.
62

62