Clean Feed Cards
MX3/4
Line Drive Amps.
AM7/19
Power requirements +12V, 0, -12V; +6V,
Nesting Box. Supersedes EPSM/14.
EP10/18. Sub-units SE2/11, MX3/3, MX3/4,
EDI 10416(1) AUG 81. DDHB 3.263(82).
0, -6V. 4U BMM
Parent equipment
AM7/19. DD 1981.
EPOS0022 EPS/22
News Contribution Equipment.
For use in unattended studios
by non-technical staff such as reporters, under control of
the nearest Broadcasting Centre. Power requirements mains.
3U chassis, connection panel and self-operated desk.
Supersedes DK4/24.
Sub-units
DK4/41, EPSM/23,
PA1/129,
MP1/31- DD 1983. DDMI 3.736(84). EDI 10488(2)AUG 8S.
DDHB 3.306(84).
EPOS0023 EPSM/23
Audio
and
Switching
Equipment.
Contains
the
electronic
and audio equipment for the News Equipment EPS/22.
Consists of standard 3U BMM frame in wall mounted box.
Power requirements mains. 3U chassis. Supersedes DK4/24.
Parent equipment EPS/22. DD 1983.
EPOS0024 EPS/24A & B
Headphone
Protector.
This
unit
limits
the
sound
level
from a pair of headphones of 600Q impedance or more using a
hybrid thick-film circuit. It requires no power other than
the audio signal and is housed in a moulded nylon case to
fit either on a P.O. 316 jack-plug or in-line with the
head phone
lead.
The
unit
can
be
supplied
in
kit
form
installation by user departments. Stereo Version - A.
Mono Version - B. Approx. 60mm x 32mm x lSmm. Supersedes
EPS/20A
&
B.
DD
1984.
EDI
10480(1)MAY
84.
DDTM
3.304(84).
DDHB
3.292(84).
DDMI
3.731(84).
DDMI
3.732(84).
EPOS002S EPS/2SA & B Headphone Protector. This unit limits the sound level from
a pair of headphones of less than 600Q impedance using a
hybrid thick-film circuit. It requires no power other
than the audio signal and is housed in a moulded nylon case
to fit either on a P.0.316 jack-plug or in-line with the
head phone lead. The unit can be supplied in kit form for
installation by user departments.
Stereo Version - A.
Mono Version - B.
Approx. 60mm x 36mm x lSmm. Supersedes EPS/21A & B. DD
1984. DDMI3.731(84). DDMI3.732(84). DDHB 3.301(84).
EDI 10481(1)AUG 84. DDTM 3.304(84).
EPOS0026 EPS/26
O.S. Selection Keyboard.
This is a limited qwerty keyboard
(only 0-9, A-2, plus clear and enter). Each numerical key
also has an engraved associated o. S. group name. The
keyboard is used to enter data (ASCII), to select outside
sources. The keyboard PCB has a small keyboard buffer PCB
connected
to
it.
Main
PCB
also used
in
type
'D'
OSSM.
Power requirements -12 V dc at 10 mA, S V dc at la mA
(Power taken from Master Module). SCPD, RBSS 1984.
EPOS0027 EPSS/27
Film-audio Synchroniser Equipment.
This equipment, based
on the MAXIM synchroniser RD4L/S11 provides a full range of
synchroniser facilities designed for post-production
editing in film areas. Power requirements mains 240 V.
96

96