PA200022 PA20/22
PA200023 PA20/23
PA200023 PA20/23A-D
PA200024 PA20/24
PA200025 PA20/25
PA200026 PA20/26
PA200027 PA20/27
PA200028 PA20/28
PA200029 PA20/29
PA200030 PA20/30
PA200031 PA20/31A
PA20/31B
Termination Panel. Termination Panel for UNIO/47
containing Souriau 17-way connector socket. Painton 2 pole
socket and Mains 4 pole plug. 105 mm x 85 mm. Parent
equipment PN3/55. Sub-units to take a UNI0/47. DD 1980.
Termination Panel.
provide input and
483mm x 133mm, with
TCPD 1980.
Bay mounted termination panel to
output connections. Recessed panel
8, 16-way tag blocks and 2 lacing bars.
Termination Panel. As PA20/23 but all versions fitted with
tagstrips, A & C Versions fitted with solder tags, C & D
versions have provision for additional cables. TCPD 1986.
Termination Panel. Rear Termination Panel for GE4/6 etc.
Equipped with XLR/LNE and XLR3 connectors. As PN3A/51D but
drilled for horizontal PCB. DD 1981.
Termination Panel. Termination Panel for unstabilised
power supplier PS3/64. 2 x 20 pole varicon outputs, one
for power and one for failure indicating relays. Mains
connector. Power requirements 250V 50Hz. PN3A/79A. DD
1981. DDMI 8.632(82).
Termination Panel. Rear termination panel for GE4/6C.
Equipped with audio and mains connectors and houses line _
switching relays. As PN3A/51D but drilled for horizontal
PCB. DD 1982.
Termination Panel. The PA20/27 is a termination panel for
use with either of the power supplies PS2/275 or PS2/187K.
It allows the above power supplies to be used in the AM4/24
PCM distribution amplifier in 4U chassis arrangements.
DDMI 6.391 (82) . Power requirements 250V 50Hz. PN3A/79A.
DD 1982.
Termination Panel. Intended for use as a termination panel
for MDl/7 VHF Stereo Modulator. Power requirements mains.
PN3A/79A. DD 1983. DDHB 5.163(83).
Termination Panel. This termination panel is for use with
a ME2/7 when mounted in half of a PN3/55 chassis.
Connections to the ME2/7 are via a 9 way 'D I connector
(mains) and a 17 way connector (A+B audio). Connections on
the rear of the termination panel are an XLR-LNE socket and
2 XLR-3 connectors for the A and B audios. Power
requirements 240 a.c. mains. Parent equipment ME2/7. DD
1983. DDHB 9.195(83). DDMI 9.302(83).
Termination Panel. Termination
RC3/18 and RC3/19 Band 11
requirements mains. DD 1984.
5.178(84). DDMI 5.448(84).
panel for RCl/29, RCl/30,
VHF receivers. Power
DDHB 5 .177 (84) . DDHB
Termination Panel. Termination Panel for DM2/3,
PS2/163. Power requirements mains 240V 20W.
Sub-units DM2/3, OS2/54, PS2/163. TCPD 1984.
Termination Panel. Termination Panel for DM2/3,
PS2/194. Power requirements mains 240V 20W.
OS2/54 and
86 x 210.
OS2/54 and
86 x 210.
216

16