back panel drilled for wire access. BMM replacement for
PN5/3 in some applications. SCPD 1978.
Input Interface Panel. Un-equipped 4U BMM rack wired to
take up to 8 UN26/29 interface units for Monitoring and
Information Centres. The application is similar to PNl/32.
CHI/54. Sub-units UN26/29 and PS2/l95A. DD 1980.
Termination Panel. Mounting for two TV36 camera cable
connectors. The plate is surface mounted. Connectors held
at 75mm from surface at angle of 750 deg. (Template in
possession of ED Mechanical Workshop.) 10cm (H) x
20cm (W) x 8.8cm (D). SCPD-TSTU 1981.
Front Panel. 4U J Width front panel with protective cover
and coding index for use with CHl/79 wire wrap board. DD
Loudspeaker Amplifier Panel. 2U high panel to mount two
Loudspeaker Amplifiers type AM8/l7 into a 19" rack system.
Sub-units AM8/l7. DD 1982.
Transparent Front Panel. Front panel for 4U BMM card
frame. Manufactured from neutral density perspex to permit
viewing of indicators etc. on cards. Only F & H width
drawn at 9.1.84. Parent equipment MPl/29. SCPD 1984.
Consists of a lU Tray which can be mounted in
- capable of mounting two Fan Modules. (code
'B' Version - capable of mounting three Fan Modules. (code
The Fan Modules are not
separately. Power requirements 240 V ac
'A' version - 483 x 410 x 44 'B' version -
must be ordered
483 x 550 x 44.
Panel. Addition to BMMCS metalwork to allow two 4U
unsupported printed boards to be mounted on an 'A' width
front panel. Only one board (the left one, when viewed
from the front) has a connector (double sided, 112 pole),
and the other hinges when released (compare with CHl/64
used with supported printed boards). Conforms to
dimensions of 4U 'A' width chassis. DD 1984.
483 mm Bay.
These panels cover un-equipped
(Similar to PNl/3l series).
apertures in a
Accommodates 5 sound amplifiers in Chl/18C and Honitoring
Jack Unit UN6/2 and Power Supplier in Chl/18B. DD 1962.
DD Spec 3.324.
Accommodates 6 sound amplifiers and power supplier. Used