PS0202l6 PS2/2l6
PS0202l7 PS2/2l7
PS020220 PS2/220
PS02022l PS2/22l
PS020223 PS2/223
PS020224 PS2/224A
PS02022S PS2/22S
PS020226 PS2/226
PS020227 PS2/227
PS020228 PS2/228
on a 32 way McMurdo connector. Provision for front panel
voltage adjustment and external sensing of load voltage.
CHl/64B. RD 1977.
Stabilised Power Supplier, designed for use with TEl/S14.
Accepts d.c. at +13.3V, +6.3V and -7.3V and delivers
reference potentia1s at +12V, +SV and -6V. Printed circuit
board 91mm x 91mm with 21 way edge connector. Improved
version of PS2/l74 which it
replaces.
DD 1977.
DDMI
8.S91(77).
Stabilised Power Supplier. Mains input, 16/SV at 2 amps
output. Part of VHF Radio Control and Indication Panel.
CHl/64A. DD 1977.
Regulator card designed for use in the Studio Managers
Panel designed by SCPD OB Unit to supply +SV at O.SA and
-SV at 120mA for the Matrix Remote Control Equipment Coder
CD2L/S16. Inputs of 10/7V a.c. and 12V d.c. are required.
Constructed
on
a
card
90mm
x
60mm.
DD
1977.
DDMI
8.S9S(78).
Regulated Power Supplier. Supplies 24v via two separate
lamp regulators to OS2/48 Bias and Erase Oscillator. Power
requirements 240V 2S0mA. CHl/64A. For use in EPl/17. DD
1977 .
Power Supply. Kingshill regulated SOV O.SA power brick
type NM10S0 mounted on ISEP chassis. Input on Cannon 'D'
connector, output on McMurdo 'Red' range connector. Power
requirements: 240V a.c. mains SOHz. ISEP unit form chassis
140mm W x 178mm H x 2S4mm D. SCPD 1977.
Power Supplier. 24V DC 8A commercial switched mode PSU
(Gou1d). Assembled in an ITT "B" with Plug-in chassis.
Increased current version of PS2/224. Power requirements
240V AC. ISEP "B" with plug-in brick. SCPD 1981.
Power Supplier. Provides 24V at 2A for OS2/48 Bias and
Erase Oscillator. Power requirements 240V, 2S0m A.
CHl/64A.
Parent
equipment
EPl/17.
DD
1977.
DDMI
7.43S(80.
13.SV; 4A Power Supply. Used initially in TM4/2.
requirements 2l0-260V a.c. 4U card. DD 1978.
S.361(78).
Power
DDMI
Power Supplier accepting two main inputs and supplying SV
d.c. and SA for Apology Caption Generator. Power
requirements 240V a.c. CHl/64B. Parent equipment GE8M/l.
DD 1978.
This power supplier provides +18V, 600mA and -S.2V, SOOmA
outputs with mains inputs of 220V-260V a.c. Mains fusing
and output short circuit protection prevent damage under
fault conditions. The supplier was designed specifically
for use with the RCSL/8. RCSL/lO and RCSL/ll receivers.
Power requirements 220V-260V a.c./SOHz. CHl/64A. DD 1978.
230

30