PS030071 PS3/71
PS3/71A
PS030072 PS3/72
PS030073 PS3/73
PS030074 PS3/74
PS040001 PS4/1
PS040002 PS4/2
PS040003 PS4/3A-D
PS040005 PS4/5
PS040006 PS4/6
battery. Power requirements 240 V ac mains or nominal 24 V
dc. 'Klippon' box 350 mm x 160 mm x 100 mm. DD 1984.
DDHB 6.265(85).
Unstabilised Power Supplier. For powering amplifiers
AM7/20 and AM7/25 i24 V at 1.5 A. Power requirements 240 V
ac i6%. 3U chassis - panel width 84.4 mm. DD 1984. DDHB
3.325(85).
Unstabilised Power Supplier. Version of PS3/71 on standard
'B' width BMM chassis for use with existing amplifier
designs e.g. AM7/21. Power requirements 240 V ac i6%.
3U - B width chassis. DD 1985. DDMI 3.749(83).
Unstabilised Power Supplier. Unstabi1ised power supplier
for use with PA6/165. Provides outputs of 9 V and I16 V,
from an input of 220-260 V ac. Power requirements 220-
260 V, 300 mA. PA1M/583. DDMI 7.551(86). DD 1984.
Unstabi1ised Power Supplier. Provides unregulated supplies
of +15 V and -15 V at 1.2 A. Originally intended to power
up to six UN16/649 in a UN16L/550C. Power requirements 240
Vac. CH1/82A. Parent equipment UN16L/550A-C. DD 1984.
EDI 10523(1)SEP85.
Unstabilised Power Supplier. Unstabi1ised power supply
supplying +34 V and -19 V dc to a single limiter, type
AM6/16. Power requirements 240 V ac. CH1/65A. Parent
equipment PA1M/91A. Chassis extender CH1A/45, CH1A/46.
TCPD 1985.
Switched Mode Power Supplier. Uses a commercially
available power supplier to provide 5V at 60A. The
supplier uses direct on line switching techniques and was
first used on the digital field store standards converter
C06/510. CH1/64D. DD 1977. DDMI 1.217(78). DDHB
1.146(78).
Switched Mode Power Supplier. Uses a commercially
available power supplier to provide 12V at 25A from 240V
a.c. mains. Uses direct on line switching techniques and
was first used on the digital field store standards
converter C06/510. CHl/64D. DD 1977. DDMI 1.219 (78).
DDHB 1.148 (78).
Switched Mode Power Supplier. The unit houses a 25W switch
mode power supply (Gou1d MMG series) and versions A to D
provide outputs at 5V, 12V, 15V or 24v d.c. Power
requirements 220V-10% to 240v+lO% approximately 125VA.
CH1/64A. DD 1979.
13.5V 4A Switched Mode Power Supplier.
240V a.c. 70VA. STD 4U BMM card.
PS2/243. Parent equipment AM14/31.
5.383(80).
Power requirements
Previously coded as
DD 1979. DDMI
Switched Mode Power Supplier. O/P (1) +5V d.c. at 4A
maximum; (2) +5V d.c. at 5A maximum; (3) -5V d.c. at 5A
maximum; (4) +12V d.c. at 2.4A maximum; derived from four
commercial switched mode suppliers. (5) +15V d.c. at 100mA
240

40