PS040027 PS4/27
PS040028 PS4/28
PS040029 PS4/29
PS040030 PS4/30
PS040031 PS4L/31
PS040032 PS4/32
PS040033 PS4/33
PS040034 PS4/34
PS040035 PS4/35
Switched Mode Power Supplier. Uses a commercially
available power supplier to provide +5 V at 4 A, +12 V at
1.5 A and -12 V at 1.5 A from 240 V ac mains. Power
requirements 240 Vac.
Parent equipment GE8L/511
(VT clock). C&ES 1983.
Switched Mode Power Supplier. 5V, 20A & 2 x 12V,
provided by Advance switching mode power supply
MGT5-20B. Output to McMurdo red range connector.
requirements mains input. CH1/64C. RD 1984.
1.75A
type
Power
Switched Mode Power Supplier. Uses two commercial modules,
the Gould Advance MGT 400 and the Melcher NSR512-9LiPC.
Output supplies: +5 V, 60 A max.
-5 V, 12 A max.
+12 V, 8 A max.
-12 V, 8 A max.
Power requirements: 176-264 V ac or 99-132 Vac, 3.5A rms.
Chassis: Modified CH1/64E. DD(l) 1984. DDHB 1.186(84).
Switched Mode Power Supplier.
Input 40-0-40 V ac at 14 A twice.
Output 28 V dc at 15 A twice regulated
28 V dc at 4 A regulated
50 V dc at 250 mA unregulated. Power requirements
40-0-40 V ac at 14 A twice.
Special 12 U 'B' width
compatible with BMM runners. Supersedes PS2/281. Parent
Equipment AM14/58 series. DD 1984. DDHB 5.461(85).
Switched Mode Power Supplier. This code defines the
combination of a PS4/29 and an un-wired termination panel.
The termination panel is fitted with mains and power
connectors to mate with the PS4/29 and the user must wire
to the connectors. No rear cover is provided. Power
requirements Mains 176 V - 264 V at 45 Hz - 440 Hz.
3 A rms typical at 240 V. CH1/64E (Requires E width space
in PN3/54). Sub-units PS4/29. DD 1984. DDHB 1.186(84).
Switched Mode Power Supplier. Provided by two 'Power
General' supply uni ts type 1050-1, 50 W. Two independant
outputs via 11 way Erni connector: 5 V, 10 A. Power
requirements 240 Vac. CH1/64A. RD 1984.
Switched Mode Power Supplier. Provided by 'Power General'
supply unit type 1100-1, 100 W. 5 V 20 A output via 11 way
Erni connector. Power requirements 240 Vac. CH1/64A. RD
1984.
Switched Mode Power Supplier. Provided by 'Power General'
supply unit type 3050-3, 50 W. Two outputs via 11 way Erni
connector: 5 V, 6 A; !12 V, 2A. Power requirements 240 V
ac. CH1/64A. RD 1984.
Switched Mode Power Supplier. Provided by 'Power General'
supply uni ts type 1050-1, 50 Wand 3050-3, 50 W.
Independant outputs via 11 way Erni connector: 5 V, la A;
5 V, 6 A; !12 V, 2A. Power requirements 240 Vac.
CH1/64A. RD 1984.
244

44