RC010031 RC1/31
RC010032 RCl/32
RC010509 RC1/509
RC010510 RCl/510
RC1/510A
RC010511 RC1/511
RCl/511A
Supersedes RC1/17. DD 1983. DDMI 5.442(84). DDHB
5.174(84). EDI 10486(1)JUN 85.
EBU Video Receiver. This unit receives digital video data
according to the EBU parallel interface specification. It
times the data to the local clock, decodes the incoming
TRS, and demultiplexes the luminance and chrominance.
Power requirements +5 V, -5.2 V. 6 U Eurocard 280 mm deep.
Termination Panel: PA20/39. DD(8) 1985.
EBU Video Receiver. This unit receives digital video data
conforming to the EBU parallel interface spcification and
synchronises the incoming data to the local reference using
up to one TV line of storage. It decodes the TRS, applies
digital blanking and de-multiplexes the luminance and
chrominance signals. Power requirements: +5 V, -5.2 V.
Chassis: 6 U Euro-card 280 mm deep. Chassis extender:
CH4/13. Parent equipment: EP5M/524, EP5M/526. Supersedes
RC1/32. D & ED (V) 1986.
UHF Receiver. This receiver provides six video outputs and
an audio output at standard levels for in-house
distribution, off air cue and continuity purposes. Ten
pre-set channels are available on the front panel or by
remote operation. Features include a synthesised local
oscillator and a Surface Acoustic Wave IF filter. Power
requirements Mains. PN3/55. DD 1980.
UHF Receiver. This is a grade 2 receiver which provides
one audio and two video outputs. Features include a
specially designed Surface Acoustic Wave IF filter and
demodulator which ensures low distortion and good teletext
performance. Tuning is push-button with AFC. Option for
seven video O/p's if required, RCl/510A. Power require-
ments mains. PN3/55. DD 1982. DDMI 5.422(82). DDHB
5.167(83).
UHF Receiver. This is a grade 2 receiver which provides
one audio and seven video outputs. Features include a
specially designed Surface Acoustic Wave IF filter and
demodulator which ensures low distortion and good teletext
performance.
Tuning
is
push-button
with
AFC.
Power
requirements mains. PN3/55. DD 1982.
UHF Reciever. This is a grade 2 receiver which provides
one audio and two video outputs. Features include a speci-
ally designed Surface Acoustic Wave IF filter and demodu-
lator which ensures low distortion and good telext perfor-
mance. Tuning is synthesised. Option for seven video O/p
if required, RC1/511A. Power requirements mains. PN3/55.
DD 1982. DDHB 5.172(84).
UHF Receiver. This is a grade 2 receiver which differs
from the RC1/511 in that it contains a 6 dB Video
Distribution Amplifier, AM4/536 and thus provides one audio
and seven video outputs. Features include a specially
designed Surface Acoustic Wave IF filter and demodulator
which ensures low distortion and good telext performance.
Tuning
is
synthesised.
Sub-units
AM4/536.
Power
requirements mains. PN3/55. DD 1982.
250

50