RC020004 RC2L/4
RC020005 RC2L/5
RC030015 RC3/15
RC030016 RC3/16
RC030018 RC3/18
RC030019 RC3/19
RC030020 RC3/20
RC030021 RC3SL/21
2048 kbit/s TFM Receiver Modem. The unit accepts a 7.5 MHz
2048 kbit/s TFM modulated signal as input and produces the
corresponding HDB3
data
stream as
output.
Power
requirements 240 Vac. Half of PN3/54. Sub-units DM4/6,
CD3/48. DD(5) 1985. EDI 10518(1)JUL85. Superseded by
RC2L/5. OBSOLESCENT.
2048kbit/sec TFM Modem. This unit accepts a 7.5MHz
2048kbit/sec TFM modulated signal as input, and produces
the corresponding HDB3 data stream as output. Power
requirements 240Vac. Modified PN3/54, half-width.
Sub-units DM4/10, CD3/56. Supersedes RC2L/4. D&ED (RF)
1987.
VHF Monitoring Receiver. Crystal controlled low
sensitivity Band 11 FM receiver medium grade with stereo
decoding. Multiplex, audio left and right output signals.
Front panel pre-set muting, carrier indication and stereo
pilot indication with opto-isolation relays at the rear
connector. Power input is Mains or !12.5V or !14.5V.
CH1/64 chassis. DD 1976. DDMI 5.358(78). DDHB 5.132(78),
5.141(78). Superseded by RC3/18. OBSOLESCENT.
AM Monitoring Receiver for broadcast band, crystal
controlled. Front panel pre-set carrier mute and carrier
drop with indication and opto-isolation relays at rear
connector. Push, pull audio output and plain carrier
output at rear connector. Mains, !12.5V or !14.5V power
supply. CH1/64 chassis. Equivalent to RC3/10 (CHl/12A).
DD 1976. DDMI 5.331(77). DDHB 5.125(77).
EDI 103l4(1)JUL77.
Band 11 F.M. Monitoring Receiver. Crystal controlled low
sensitivity Band 11 FM receiver medium grade with stereo
decoding. Multiplex, audio left and right output signals.
Front panel carrier, stereo and presetable tone indicators,
with opto-isolator outputs at the rear connector. Designed
to be used with Termination Panel PA20/30.
Power
requirements mains. Supersedes RC3/15. DD 1983. DDHB
5.178(84). EDI 10486(1)JUN 85. DDMI 5.451(84).
Band 11 F.M. Monitoring Receiver. VHF Band 11 FM
synthesiser tuned receiver, 50 KHz step size. Low
sensitivity medium grade with stereo decoding, multiplex,
audio left and right output signals. Front panel carrier,
stereo and presetable tone indicators with opto-isolator
outputs at the rear connector. Designed to be used with
Termination Panel PA20/30. Power requirements mains.
CHl/64A. DD 1983. DDMI 5.449(84). DDHB 5.175(84). EDI
10486(1)JUN 85.
FM Monitoring Receiver. The unit monitors an FM signal and
detects tones therein. Power requirements +12 V, -12 V at
170 mA. CH1/65A. TCPD 1985.
Radio Data Monitoring Receiver. This is a bay-mounted
Monitoring Receiver for the BBC Radio Data Service. It is
electrically identical to the RC3SP/21. Power requirements
240Vac. Fits into PN3/54. Sub-units RC1/30, CD4S/23,
252

52