UN26/46, COS/S07. Control Panel PA6/140. DD 1982.
DDHB 7.319(84). DDMI 7.S22(84). EDI 10498(1)AUG 84.
ANIMACE Animation Control Equipment. The unit controls an
Ampex VPR2 video tape machine and a 16mm Sepmag machine as
part of a system to assemble a series of animated video
effects from an Electronic Stills Store onto videotape.
Power requirements 240V a.c. mains.
C width, 4U BMM
assembly, PN3A/S3C back connector. Sub-units CD3/39,
UN26/46, COS/S06, PS2/184. DD 1982. DDMI 7.S12(83). DDHB
7.310(83). DDHB 7.310(83).
Timecode Update Equipment. This equipment receives bi-
phase mark serial timecode and capstan drive pulses from a
VCR. It decodes the timecode waveform and at slow tape
speeds it updates the timecode using the capstan pulses.
The updated time is displayed on an eight digit display
panel and the updated timecode is also available for
external use. Power requirements 240V mains. 'c' width of
7.S08(83). DDHB 7.30S(82)
Edifilm Control Unit. The unit accepts commands from the
Edifilm control panel and controls a V.T. machine
accordingly. Power requirements 240 Vac, IS W. PN3A/S3C.
Parent equipment EP10S/S03. Sub-units UN26/46, CD3/39,
PS2/184, COS/S03 (Modified). DD 1984.
Modified paper take up unit designed to clip on to the
front of the RDS/S01 from which it is powered. DD 1977.
Data Logger. This unit is designed to interface with the
Automatic Measurement Unit, ME2/8 and embodies a 14+2
character printer using 37mm paper. Power requirements
240V mains. ABS case, 8" x 14" x 4" deep. DD 1982. DDHB
9.197(8S). DDMI 9.304(8S).
Data Logger. The unit consists of a printer and processor
to work in conjunction with the Automatic AF Receiver
ME2/8. Power requirements 240 Vac. CH1/6SD. Chassis
extender CH1A/46, CH1A/61. Termination panel PA20/33.
Teletext Printer. From a feed of 62S line video this unit
provides a hard copy of a page of teletext data. It also
provides outputs to enable this teletext data to be
displayed on a monochrome or colour monitor. Power
requirements mains. Case size approximately 380mm deep x
260mm wide x l80mm high. DD 1979. EDI l037S(l)M AR80.
As RP2/1B but fitted
Disk Reproducer. As RP2/8, but replacing Gates turntable
with Technics SPlO Mk.2, and "Gray" pickup arm replaced
with MP1/18. ED 1980.