RP020009 RP2/9
RP2/9A
RP020010 RP2/10
RP2/10B
RP2/10C
RP2/10D
RP030501 RP3/501
Stereo Disk Reproducer. This is the fully modernised
version of the RP2/1 with stereo facilities. It comprises
the RP2/1C updated with the RP2/9 Kit whereby the existing
turntable, pickup arm and groove location are replaced with
new designs including the Technics SPlO mark 2P turntable.
DD 1978. DDMI 1.224(78).
Mono Disk Reproducer. This is the fully modernised version
of the RP2/1 with mono facilities. It comprises the RP2/1D
updated with the RP2/9A Kit. Whereby the existing
turntable pickup arm and groove location are replaced with
the new designs including the Technics SPlO mark 2P
turntable. DD 1978.
Disk Reproducer including amplifier AM16/16 and Turntable
Technics
SPlO
Mk
n.
DD
1977.
DDMI
1.196(76).
DDTM
1.Reproducer.
Table top disk reproducer 33, 45, 78 r.p.m.
stereo and mono. Minimum facilities version for Continuity
use. Includes scratch filter, variable attenuator for
signal
level,
line
output
amp.
Groove
location.
Floor
standing by use of CT1/S plinth. Power requirements 240V
a.c.
:t6%.
2U BMM unsupported cards.
Supersedes RP2/1,
RP2/6 and RP2/8. Sub-units PS6/96A and AM16M/16. DD 1980.
DDHB 1.159 (81).
Full Facilities Disk Reproducer. Table top disk
reproducer: 33, 4S, 78 r.p.m. stereo and mono. Full
facilities version for Radio and External Broadcasting.
Includes fader, RSA scratch filters, main line o/p amp and
auxiliary o/p amp and head phone monitoring amp. Groove
location. Floor standing by use of CT1/S plinth. Power
requirements 240V a.c. :t6%. 2U BMM unsupported cards.
Supersedes RP2/1, RP2/56 and RP2/8. Sub-units PS6/96B and
AM16M/16. DD 1980.
Television Disk Reproducer. Table top reproducer 33, 45,
78 r.p.m. Stereo and mono. Full facilities version for
Television Studios. Includes Fader, RSA, Scratch filters,
line o/p amp, Bussing mixer, groove location. Floor
standing by use of CT1/5 plinth. Power requirements 240V
a.c. :t6%.
2U BMM unsupported cards.
Supersedes RP2/1,
RP2/6 and RP2/8. Sub-units PS6/96C and AM16M/16. DD 1980.
Mono Disk Reproducer. Table top disk reproducer: 33, 4S,
78 r.p.m. Mono facilities only using single channel
version of the stereo electronics. Includes Fader,
auxiliary o/p amp. Main line o/p amp, RSA, scratch
filters,
head phone
monitoring.
Power
requirements
240V
a.c.
:t6%.
Supersedes
RP2/1.
Sub-units
RA6/96D
and
DM16M/16. DD 1980.
Precision Slide Mounting Table. Self contained back
projection unit enables 3Smm film to be aligned accurately
relative to the reference edges of a standard slide prior
to mounting in an Agfa Type K self-adhesive slide mount
according to BS5115. The screen displays a x 4 image of a
whole frame and incorporates a precision graticule.
Register pins operated by lead screws for positioning hold
the film strip and integral cutting blades isolate the
required frame. Existing slides can also be checked. No
setting up adjustments are required, accuracy is maintained
by rugged construction. An illuminated surface enables the
frames in a film strip to be compared. Weight 10kg. Power
259

59