SE050013 SE5/13
SE050501 SE5/501
SE060001 SE6/1,lA
SE060002 SE6/2 A-D
SE060003 SE6/3
SE060004 SE6/4
Data Interface Switch. The unit conveys logic selected PCM
data to a relay chaneover output with validity of output
indicated on front panel.
8 data channels each unit.
Logic and power .is provided by PSI/51. For use with PCM
stereo transmitter input equipment. Power requirements
24V. CH1/64J. Parent equipment PSI/51. TCPD 1982.
Datacast Switching Equipment. The Datacast Switching Unit
switches between main and backup Datacast Transmission
Equipments. V24 ports and video ports are switched under
manual control of a front panel switch. Power requirements
240 Vac. BBC Chassis Code 3 U BMM Panel PN3/58. RD 1986.
Master Power Switch. Master switch box, intended for use
in sound studio areas to switch mains and logally-generated
50V supplies. Differs from BX6/8 in that it has no 50V
indicator, but has an additional label to state source of
incoming mains supply and maximum loading of unit. SE6/1A
same as SE6/1 but for flush mounting only. BX6/8 was
original code. SCPD 1979.
Operational Master Switch. Master switch box intended for
use in sound studios, housing four pole 30 amp switch for
switching mains
and
50
volt
supplies.
Four versions
available:
'A' Surface mounting with mains & 50V lamp indicators
'B' Surface mounting with mains lamp indicator only
'c' Surface mounting with mains & 50V lamp indicators
'D' Surface mounting with mains lamp indicator only
Supersedes BX6/8 and SE6/1. SCPD 1983.
Lamp Switching Equipment. A unit mounting 2 mains input
XLR-LNE fixed plugs and 2 XLR-LNE fixed sockets, for mains
and signal lamp drive, on its front panel. The unit houses
2 solid state relays mounted on a P.C.B. for switching the
mains lamps. The relays are driven by 5 V logic inputs.
THIS UNIT MAY BE USED ONLY IN EP5M/23, BEING PART OF NEWS
CONTRIBUTION EQUIPMENT, EP5 22. USE IN ANY OTHER EQUIPMENT
OR CONFIGURATION IS TOTALLY PROHIBITED. Power requirements
+5 V 300 mA. CH1/82A. Parent equipment EP5M/23. DD 1984.
DDMI 3.741(84).
Transmitter Control Switching Equipment. Control box with
remote key switching of two transmitters with lamp
indication of status. Diecast box 188 mm x 120 mm x
52 mm. TCPD 1985.
272

72