UN030069 UN3/69
UN030070 UN3/70
UN030071 UN3/71
UN030072 UN3/72
UN030073 UN3/73
UN3/73A
UN3/73B
UN030074 UN3/74
UN3/74A
consisting of a switch and LED mounting printed circuit
board (card 1) and an electronics printed circuit board
(card 2). It forms part of the Playback Machine Control
Panel. Power requirements +5V from the EP10M/502.
Approximately l2-7mm x l78mm printed circuit board. DD
1980.
DDMI 7.474(81).
Events Panel Data Control Unit. Used in conjunction with
Timecode Events Pulse Generator GE2M/14 to enter and
display timecode data. The unit is a sub-assembly
consisting of a switch and LED mounting printed circuit
board (card 1) and an electronics printed circuit board
(card 2). It forms part of the Events Control Panel.
Power requirements +5V from the GE2M/14. Approximately
279mm
x
102mm
printed
circuit
board.
DD
1980.
DDMI
7.475(81).
Store Control Unit. Electrically similar to 003/65, but
fitted with improved opto-coupler. Fitted with 2
additional IC's not related to the working of this unit.
Power requirements +5V d.c., +12V d.c., -12V d.c. CH1/64J.
Parent equipment GE8M/504. DD 1980.
Store Control Unit. Similar to UN3/65 but with a different
opto-coupler. Also has SN75150 dual line driver and an
SN75152 dual line receiver added. Power requirements +5v
d.c. CH1/64J. Parent equipment GE8M/506. DD 1981.
Tarif 2 Control Unit. Main Circuit board of Tarif 2
control panel PA6/145, contains all the active circuitry of
the PA6/145. Non-standard size card for hard wiring into
panel. Power requirements +12 V dc from Tarif 2 EP6L/509.
PCB size = 160 mm x 65 mm. Parent equipment PA6/145. DD
1982. DDMI7.502(82).
Amplifier Remote Control Unit.
Provides 3 bit binary code for
steps to -10 dB) of AM7/20.
SCPD 1982.
Amplifier Remote Control Unit.
for level control with fixed
panel. 2U unsupported P. C. B.
equipment PA6M/149. SCPD 1983.
Amplifier Remote Control Unit. Provides a variable binary
code via thumbwheel switch for level control in 6 steps of
2 dB from 0 dB to +10 dB. 2U unsupported P.C.B. with
front panel. Parent equipment PA6M/149. SCPD 1983.
AM7/20 Level Control Unit.
level control (0 dB in 2 dB
Parent equipment PA6M/149.
Provides a set binary code
level engraving on front
with
front
panel.
Parent
Radio Talkback Control Unit. Intended for TV Outside
Broadcast communications. The unit remotely controls a
Storno base station for channel selection, squelch level
transmitter on the talkthrough functions. Power
requirements :t16 V 25 mA. Mounted on 0.6" width front
panel for 3U racking with 96 way Euro connector
100 mm x 220 mm Eurocard. Supersedes UN3/60. SCPD 1983.
Radio Talkback Control Unit. Complements UN3/74 but allows
SWTB input to override PTB or talk through selection.
Power requirements :tlS V dc, 140 mA. 222 mm x 100 mm
Eurocard. Chassis extender CH4/7. SCPD 1985.
287

87