UN260025 UN26/25
UN260026 UN26/26
UN260027 UN26S/27
UN260028 UN26S/28
UN260029 UN26S/29
UN260030 UN26S/30
UN260031 UN26S/31
CDX 3U 'J' size card (C06). Parent equipment MN8M/1. DD
1978.
CIP-AFR Interface Unit. Provides optically-isolated
interface between PA6M/97 CIP and TMlM/l family of AFR' s.
Power requirements provided by TMlM/l. DD 1978.
8085 Processor Unit. Microprocessor unit utilising UN26/22
general purpose board. This unit is tailored to producing
a multistandard teleprinter receiver, accepting serial data
at 50, 75 and 110 band and storing characters in ASCII form
in an external memory, switches to select various options
are available on front panel. Power requirements 5V d.c.
4U unsupported card with edge connector. Parent equipment
UN26/22. DD 1979.
8085 Processor Unit. Microprocessor unit utilising UN26/22
general purpose board. This unit tailored to accept data
in ASCII serial form and 110 baud and store is an external
memory.
At
a
pre-set
time
or
by
manual
command,
a
'collated' output is given, again in serial 110 baud, with
messages collated according to their source. Switches to
select options, are hidden when unit is inserted in main
frame.
Power
requirements
5V d.c.
4U unsupported card
with edge connector. Parent equipment UN26/22. DD 1979.
MCP Output Interface Unit. Microprocessor unit utilising
UN26/22
general
purpose
board.
The
unit
scans
a
Monitoring and Information Centre (MIC) store composing
serial data message for transfer to a master MIC. Power
requirements 5V d.c. 4U unsupported card with edge
connector. DD 1979. DDHB 8.417(84).
Data Input Interface Unit. Microprocessor unit utilising
UN26/22 general purpose board. This unit supersedes a pair
of units C01/8 and UN26/2. It receives MIC data in serial
monitoring code, translates it to parallel form, locates
the correct point for storage in the MIC store and
processes
the
storage.
Power requirements 5V d.c.
4u
unsupported card with edge connector. Sub-units UN26/22.
DD 1979.
Fault Processor. A composite unit to replace GE2/6,
GE2/6A, UN23/1 and SCl/l units in the TMlM/l series of
fault reporters. The unit contains a microprocessor, which
scans fault inputs and takes appropriate action. It also
contains a 7 day clock function. Power requirements 3
supplies of +5V at l50mA, 630mA and 190mA. Special base on
a combination of 3 CHl/63' s. Supersedes GE2/6, GE2/6A,
UN23/31 and SCl/l. Parent equipment TM1M/l, TMlM/lA,
TMlM/1B and TM1M/lC. DD 1979.
280 Processor. This unit is intended to be the Central
Processing Unit of a microcomputer system. It
incorporates a 280 microprocessor, clock driver circuitry,
bus buffers and a small amount of RAM and PROM. The on-
card memory allows the unit to run a program in a self-
contained manner principally for self-test and diagnost ie
purposes although it might comprise the entire memory in a
333

33