Wideband Amplifier, 4MHz-27MHz. Output: lOW for any input
level between 1mW and 100mW. Z in: 750. unbalanced. Z
out: 1000. balanced. Diecast box with heat sink 203mm x
127mm x 133rnm. DD 1970. DD Spec 5.185. DDTM 5.65(70).
2 x 35W RF Amplifier used on BA13/15 to drive two AM14/9.
Comprises AM14/16A, AM14/16B on CH1/1H. DD 1970.
DD Spec 5.200. OBSOLESCENT.
150W RF Amplifier, Band 11, comprising
AM14/10 feeds the other 3 via FL6/10.
combined in FL5/5 to give 150W.
DD Spec 5.192. EDI. OBSOLESCENT.
4 AM14/10. One
Their outputs are
CH3/1H. DD 1970.
35W RF Amplifier used on AM14/14. Suffixes A,
panel layout for mounting in left-hand and
positions respectively. Superseded by AM14/29.
Band 11 Power Amplifier, accepts a frequency modulated
input signal at a frequency between 87.5MHz and 104.5MHz
and amplifies it to a preset level between 5W and 15W.
Power requirements 12.5V 3A. Printed board mounted on
metal plate 132rnm x 125rnm approximately. Parent equipment
TM4/2. Superseded by AM14/25A. DD 1978. DDMI5.370(79).
Band 11 Amplifier. This power amplifier is a 483mm
Rand-Mounting design, incorporating three AM14/30.
Amplifiers driven in parallel from a single AM14/29. The
amplifier requires 2W of drive in the range 88-104MHz to
produce 250W output. Power requirements +34V d.c. 18A
maximum. Supersedes AM14/9. Sub-units AM14/29 and
AM14/30. DD 1978. CANCELLED.
Band 11 R.F. Amplifier 25W. Complements the existing
power amplifier modules AM14/29 (45W), AM14/30 (100W), and
is housed in similar metalwork, forming a series of
input/output connections. Power requirements 34W d.c.
1.2A. DD 1979. CANCELLED.
Band 11 Multiple Channel Amplifier. This amplifier houses
3 or 4 AM14/33 25W modules each carrying a separate band
11 service. The unit is 482rnm rack mounted and withdraws
from the bay on slides for ease of maintenance. 'A'
version: 4 service amplifiers. 'B' version: 3 service
amplifiers. Power requirements 34-40V d.c. 6A maximum.
Sub-units CH1/78A or CH1/78B and AM14/33. DD 1979.
Band 11 Multiple Channel Amplifier. The AMl4/39A(B) is a
complete 482mm bay containing four (three) identical
amplifier chains, each of which corresponds to a band 11
channel. The four (three) channel outputs are
individually monitored prior to feeding a multi-channel