- 88 -
Amplifier Cabinet and Plinth
control cubicles. DD 1960.
Used in RP2/5
Wooden Cabinet for mounting Leevers-Rich E4 Recorder.
DD 1963. OBSOLESCENT.
Studio Wall Cabinet for distribution of technical services
where BX3/50l is too large. Accommodates PA20/l-5 as
required. DD 1965. OBSOLESCENT.
Desk Apparatus Cabinet to enclose units constructed on
Panel 231 with a rear framework for free standing. First
used for PA8/l97A at Cardiff. Similar to CHI/2 but deeper
front to back and higher sloping front. DD 1967.
Trolley Apparatus Cabinet used in EP5/ll to house standard
483mm panels and
Apparatus Cabinet for mounting on tables or desks. Free
standing, 375mm long x 241mm high, with removable sloping
front (32lmm x l33mm) and rear (33Omm x l71mm) panels.
DD 1968/70. WITHDRAWN.
As CT2/l9A with addition of sloping fronted telephone
handset container attached to the left-hand end. Used in
News Areas of Television Centre for Despatch and Radio Car
boxes. DD 1968/70. WITHDRAWN.
Trolley Apparatus Cabinet for mounting 483mm panels. Used
in EP14/502. DD 1968/70. WITHDRAWN.
Used at Broadcasting House for the control panel of the
BH-WRT digital switching system. Similar in appearance to
CT2/4. Associated with EPlM/ll. DD 1968/70. WITHDRAWN.
Studio Mixer Apparatus Cabinet used with replacement for
EP5/502. Contains mixer electronics and mounts on a 483mm
bay. Power supplies and local control facilities are
separately housed. Forced air ventilation. Height is
755mm and depth 427mm. DD 1971. DDMI8.442(73).
CT2 Sub Group not available for new designs DD 1977.
CT3 DESK CABINETS
Part of DK4/2. 610mm wide. DD 1956/57.
DD Spec 3.131.